Software setup

Note For help connecting to the OV20i software, see Connecting to OV20i Software . Managing and Creating Recipes The All Recipes page is the home page for the OV20i software (pictured below). A Recipe is a unique inspection program, althou...

The Recipe Editor provides a simple workflow for users to change image capture settings, set up part alignment, define regions of interest (ROIs) for their inspection, collect and label model training data, configure process logic and IO behavior, a...

Use the Imaging Setup page to adjust camera settings and photometric lighting to obtain the best image quality for inspection, and select trigger settings to suit your use case. Remember to Save Make sure to click Save Imaging Settings in t...

Use the Template Image and Alignment page to capture a Template Image as a reference for your inspection program, and use pattern-matching to locate and orient parts for relative inspection. Preview If a Template Image has not yet been capt...

Use the Inspection Setup page to draw Regions of Interest (ROIs) on the Template Image to define key inspection areas, and group regions with similar appearances or failure modes into multiple Inspection Types. Preview The preview pane (on th...

Use the FTP menu to send captured images to a remote server using the File Transfer Protocol (FTP). Click Configure FTP to open up the FTP configuration Modal. Enable: Toggle to turn FTP communication on/off Server Host: Net...

Use the Classification Block page to train a deep learning model to determine what’s inside an Inspection Region . Preview The preview pane (on the left-hand side) displays a live preview until an image is captured or is selected using the...

The Library contains all of the images that are stored on the camera's SD card. These images are used for model training purposes, encompassing both successful and unsuccessful instances, and provide the means to teach the camera to recognize and di...

Use the Label and Train page to train a deep-learning model to take an image and segment classes at a pixel-level based on labeled defects. Preview The preview pane (on the left-hand side) displays a live preview until an image is captured ...

Use the IO Block menu to define Pass/Fail rules for each captured image, and use a built-in Node-RED editor to customize digital IO functions, complex logic, and web-based dashboards and user interfaces. Configuring IO is typically one of the final...

The OV20i has a Users and Permissions system to restrict functionality behind a password. By default, the users and permissions system is disabled, and any user with network access has full access to the OV20i. The user and permission settings are ...

This guide will walk you through setting up PROFINET on your OV20i. Enabling PROFINET The first step will be to connect to the OV20i software and navigate to the Industrial Ethernet menu on the left-hand side. From this menu, complete the...

Navigate to System Settings to configure network settings and system time, view device storage, download system logs, or restart the camera remotely. Device Network When setting up your camera, it will typically look for DHCP settings on your netw...

In this page you will find all the release notes from Overview’s software updates: v2024.18.90 (Sept 24, 2024) Download 🆕 View All ROIs : The View All ROIs page now loads significantly faster than before. By caching ROIs that don...

Upload and Install a Software Update Select Software Update from the OV20i Toolbar. Click the link on the right-hand side ( https://updates.overview.ai/latest ) to download the latest OV20i software update file to your computer....