Knowledge Base Home
User Manual
Ask Eddy AI
Contents
x
User Manual
Powered by
Software Guide
16 Articles
in this category
Print
Contents
Software Guide
16 Articles
in this category
All Recipes (Home Page)
Note For help connecting to the OV20i software, see Connecting to OV20i Software . Managing and Creating Recipes The All Recipes page is the home page for the OV20i software (pictured below). A Recipe is a unique inspection program, althou...
Updated on : 22 Oct 2024
Recipe Editor
The Recipe Editor provides a simple workflow for users to change image capture settings, set up part alignment, define regions of interest (ROIs) for their inspection, collect and label model training data, configure process logic and IO behavior, a...
Updated on : 22 Oct 2024
Imaging Setup
Use the Imaging Setup page to adjust camera settings and photometric lighting to obtain the best image quality for inspection, and select trigger settings to suit your use case. Remember to Save Make sure to click Save Imaging Settings in t...
Updated on : 08 Oct 2024
Template Image and Alignment
Use the Template Image and Alignment page to capture a Template Image as a reference for your inspection program, and use pattern-matching to locate and orient parts for relative inspection. Re-Capture Template Image: Click to change the T...
Updated on : 22 Oct 2024
Inspection Setup
Use the Inspection Setup page to draw Regions of Interest (ROIs) on the Template Image to define key inspection areas, and group regions with similar appearances or failure modes into multiple Inspection Types. ROI Labels: Toggle ROI labels ...
Updated on : 10 Oct 2024
Classification Block
Use the Classification Block page to train a deep learning model to determine what’s inside an Inspection Region . Capture: This lets you take a new Capture and use it to train a model. Note While in Live Preview Mode, clicking on ...
Updated on : 22 Oct 2024
Label And Train (Segmentation)
Use the Label and Train page to train a deep-learning model to take an image and segment classes at a pixel-level based on labeled defects. Capture : This lets you take a new Capture and use it to train a model. Import From Library : This...
Updated on : 22 Oct 2024
IO Block and Node-RED Logic
Use the IO Block menu to define Pass/Fail rules for each captured image, and use a built-in Node-RED editor to customize digital IO functions, complex logic, and web-based dashboards and user interfaces. Configuring IO is typically one of the final...
Updated on : 22 Oct 2024
FTP
Use the FTP menu to send captured images to a remote server using the File Transfer Protocol (FTP). Click Configure FTP to open up the FTP configuration Modal. Enable: Toggle to turn FTP communication on/off Server Host: Net...
Updated on : 10 Oct 2024
HMI
After training, the model is automatically deployed and is ready for production. When you open the HMI page you will see something like the screenshot below. Note In the top right it says NO RESULT until you capture. Default behavior is FA...
Updated on : 22 Oct 2024
Library
The Library contains all of the images that are stored on the camera's SD card. These images are used for model training purposes, encompassing both successful and unsuccessful instances, and provide the means to teach the camera to recognize and di...
Updated on : 04 Nov 2024
PLC Communication - PROFINET
This guide will walk you through setting up PROFINET on your OV20i. Enabling PROFINET The first step will be to connect to the OV20i software and navigate to the Industrial Ethernet menu on the left-hand side. From this menu, complete the...
Updated on : 01 Nov 2024
Users and Permissions
The OV20i has a Users and Permissions system to restrict functionality behind a password. By default, the users and permissions system is disabled, and any user with network access has full access to the OV20i. The user and permission settings are ...
Updated on : 11 Oct 2024
System Settings
Navigate to System Settings to configure network settings and system time, view device storage, download system logs, or restart the camera remotely. Device Network When setting up your camera, it will typically look for DHCP settings on your netw...
Updated on : 04 Oct 2024
Software Update
Upload and Install a Software Update Select Software Update from the OV20i Toolbar. Click the link on the right-hand side ( https://updates.overview.ai/latest ) to download the latest OV20i software update file to your computer....
Updated on : 04 Nov 2024
Software Updates Release Notes
In this page you will find all the release notes from Overview’s software updates: v2024.18.90 (Sept 24, 2024) Download 🆕 View All ROIs : The View All ROIs page now loads significantly faster than before. By caching ROIs that don...
Updated on : 04 Nov 2024
ENTER
ESC
Eddy AI, facilitating knowledge discovery through conversational intelligence
Search Limit Exceeded. Please upgrade the plan.
Answer copied!
No results found
Provide more context or information so that I can better understand and assist you