Setting up MQTT Communication
- 05 Aug 2024
- Print
- PDF
Setting up MQTT Communication
- Updated on 05 Aug 2024
- Print
- PDF
Article summary
Did you find this summary helpful?
Thank you for your feedback
The camera can work with Node-RED and MQTT requests to communicate with other devices. The MQTT requests are used to get information, trigger the camera, or send information.
Step 1 :
The camera's IP address must be in the same range as the device it is interacting with.
Step 2 :
A communication port (MQTT in) must be opened, where we assign the port we will be listening to.
Step 3 :
You need to set up the server with which the camera will be communicating and the topic.
Step : 4
To send a response to that port, use the MQTT out and setup the server and topic of the message.
Was this article helpful?