Walkthroughs

Note Download the sample recipe here . From the All Recipes page, click + New Recipe in the top-right corner. The Add A New Recipe modal will appear. Enter a Name for the Recipe (required) that reflects the specifi...

Note Download the sample recipe here . From the All Recipes page, click + New Recipe in the top-right corner. The Add A New Recipe modal will appear. Enter a Name for the Recipe (required) that reflects the specifi...

If images that are not supposed to fail are failing, follow the steps below to add the images to the model and retrain. Connect to the camera (see Connecting to OV20i Software for help). Ensure the Recipe you want to retrain is Active . ...

This example shows you how to set up a single recipe that can inspect different parts, angles or views without changing to other recipes.  There are a variety of reasons to do this, but two primary use cases: 1 - when there isn't enough time b...

Order the Required Serial Converter Purchase the RS485 to RS232 Serial Converter from [this link] . This device facilitates the conversion from RS485 signals, originating from the camera, to RS232. Connecting the Serial Converter to...

The camera can work with Node-RED and TCP to communicate with other devices. It's quite simple; the steps are: Step 1 : - The camera's IP address must be in the same range as the device it is interacting with. Step 2 : - A communication port...

Visit this page and verify you have followed all the steps and can’t use the usb-c port for communication. The camera not connecting with the configured IP When connecting your computer to the camera, it's' important to ensure both...

The camera can work with Node-RED and an HTTP endpoint to request a recipe change. Since the port is open, other devices can also request a recipe change from the camera. Below is a flow that demonstrates how the function operates: Inject ...

The camera can work with Node-RED and MQTT requests to communicate with other devices. The MQTT requests are used to get information, trigger the camera, or send information. Step 1 : The camera's IP address must be in the same range as the de...

The camera can work with Node-RED and MQTT requests to communicate with other devices. The MQTT requests are used to get information, trigger the camera, or send information. It is possible to trigger the camera using MQTT request, sending a message...

Step 1: Create and Configure the Custom Data Tag Start by creating two tags, one to copy data from the custom data tag and the other to move it on to the camera output tag. Both have to be a string data type. Step 2: Define the Byte Or...